Cricut EasyPress Instructions

Yes — our DTF transfers work great with a Cricut EasyPress. Use these settings:

300°FTemperature

15 secPress Time

FirmPressure

Hot PeelPeel Type

Set up on a firm, flat surface with a pressing mat underneath — not a flimsy ironing board.
Preheat the EasyPress to 300°F and warm the garment for 3–5 seconds.
Position the transfer print-side down.
Press with firm, even body-weight pressure for 15 seconds. Don't slide the press.
Peel hot immediately, then cover with parchment and re-press 5 seconds.

💡 Larger designs: if your design is bigger than the EasyPress plate, press in sections with a slight overlap — 15 seconds each.

Premium DTF transfers & custom apparel, printed in-house in Hoffman Estates, IL. Same-day pickup, no minimums.

2099 Stonington Ave
Hoffman Estates, IL 60169
Just off I-90

Mon–Fri: 9AM – 5PM
Sat: 10AM – 2PM · Sun: Closed