Heat Press Instructions

Heat Press Instructions

The heat press gives the best, most consistent results for DTF transfers. Follow these settings:

310°FTemperature
10–15 secPress Time
Medium–firmPressure
Hot or ColdPeel Type

Step by step

  1. Preheat your press to 310°F (154°C) and pre-press the garment for 3–5 seconds to remove moisture and wrinkles.
  2. Position the transfer print-side down on the garment.
  3. Press at 310°F with medium–firm pressure for 10–15 seconds.
  4. Peel hot or cold — remove the film in one smooth motion right away while warm, or let it cool first. Both work.
  5. Finish (optional): cover the design with parchment paper and re-press for 5 seconds for maximum durability.
💡 Care: wait 24 hours before the first wash. Wash inside-out, cold, and hang dry or tumble low — your print is wash-tested past 50 washes.

Order DTF transfers → · Questions? +1 (224) 553-3999